OMNI Penetrating Sealer 32 oz

OMNI Penetrating Sealer is great for both sanded and Non-Sanded Cement Grouts. This sealer is also a efficient stain protection from most contaminates. The Penetrating Sealer penetrates into surfaces and preserves the original look of surface. Using the OMNI penetrating sealer will make any future or ongoing care easier. With it's unique Low VOC formula it allows moisture vapor transmissions.

High Gloss Sealer Application

Interior and Exterior use

Read entire label before using. Always test in small areas with a 24 hour cure time. Allow new grout installations to cure for at least 48 hours prior to application.
- Apply Penetrating sealer using a Sponge or a mop or a brush
- Allow Sealer to penetrate surface for 5 minutes
- Clean surface completely dry
- May Require more coats
- Allow 30 minutes drying time in between coats
- Ready for traffic after 12 hours of last coat. Keep surface dry for up to 24 hours.

OMNI Penetrating Sealer Highlights

- Up to 3 years Depending on type, density and texture of sealed surface
- Unglazed Tiles (Ceramic, Porcelain and Quarry.
- Concrete and Masonry Surfaces (Adove, Brick , Pavers, Saitillo and Terra Cotta)
- Natural Stone (Granite, Limestone, Marble, Onyx, Quartzite, Sandstone, Serpenstine, Slate, Soapstone and Travertine.

For all of your Grout Cleaning needs OMNI offers whole line of Grout Cleaning products.

OMNI Penetrating Sealer is a excellent sealer. Order some today!