OMNI Poultice Stain remover 12 oz

The OMNI Poultice Remover is a Non-toxic multi-purpose Absorptive clay to remove deep below surfaces stains and a fine gritty powder to scrub away surface stains. This cleaner is biodegradable and it contains baking soda to help remove any odor. Your new cleaner can also be added to most cleaners to improve the Poultice Stain Remover performance.

Poultice Stain Remover Application
Deep Set Stains
Read entire label before using. Always test in small areas with a 24 hour cure time. Allow new grout installations to cure for at least 48 hours prior to application. 

- Form a thick paste by mixing the Poultice stain remover with water
- Apply paste about 1/4" thick to stained area and allow paste to extend beyond edges of stain by at least 1".
- Allow paste to sit on surface for 24 to 48 hours.
- Remove paste with non-marring tool
- After stain has been removed, clean paste with a Sponge or a microfiber towel and water.
**Some stains may require more applications and if surface is to be sealed, allow 24 hours drying time. 

Surface Stains

- Apply small amount of water to surface that needs to be cleaned.
- Sprinkle Poultice Stain Remover to wet surface and mix into thin slurry
- Scrub surface with a scrup pad or non-marring tool until stain is gone from surface
- Once stain is removed, clean surface with a Sponge or a microfiber towel and water.
**Some stains may require more applications and if surface is to be sealed, allow 24 hours drying time. -

Omni Poultice Stain Remover Highlights

- Non-Toxic, Non-Flammable and Biodegradable
- Interior and Exterior Applications
- Effective on Tile, Stone, Concrete, Masonary and Grout Surfaces
- VOC compliant

For all of your Grout Cleaning needs OMNI offers whole line of Grout Cleaning products.

OMNI Poultice Stain remover is a great remover. Order yours today!